ChemIndustrial makes it easy to support our modular hydroclones. For each diameter of hydroclone, we make an AISI304 stainless steel hydroclone external support member.
These parts are designed to support the hydroclone from horizontal 1″ square tubing or 1″ x 2″ rectangular tube. They are designed for slip-on assembly, or for bolting or for back welding onto the support tube.
The hydroclone is generally held in place on the support member by a clevis pin, but bolted assembly is also possible. Most hydroclones can be supported with a single support member, but two of them can be used if you need extra support.
|Support part #||Hydroclone diameter||Material|